COCKPIT SUITE — 4SB HARDWARE4SB HARDWARE / IN DEVELOPMENT

BUILDING BLOCKS FOR YOUR COCKPIT

Your cockpit.
Your hardware.

Modular inputs, readouts and instrument control for your own cockpit. The hardware is designed for use across simulators; suitable interfaces and adapters connect it to your setup.

Explore hardware Live Hub software↘

DIY COCKPIT / 4SB HARDWARE

4SB Input Card 128Your cockpit starts on the workbench

YOUR COCKPIT. YOUR BUILDING BLOCKS.

Hardware with a purpose.

From your first switch to a complete instrument group: find the right addition to your build.

All products are in development. Pricing and availability will follow after completion.

10 of 10 products

TouchDeck 7 with a black enclosure, desktop stand and ETS2 control interface

CS-TD7In development

7-INCH TOUCH PANEL · WITH DESKTOP STAND

Cockpit Suite TouchDeck 7

A 7-inch touch control panel in development for your simulator. A black plastic enclosure with a separate front bezel and an angled desktop stand are planned. The shown interface is intended for Euro Truck Simulator 2; connections and final functionality will be defined during development. Compatible with ETS2 and ATS2.

Price to followDiscover TouchDeck

Green 4SB Input Board with 128 inputs for custom cockpits and control panels

4SB-IB128In development

USB HID · 128 NATIVE DX INPUTS

4SB Input Card 128

USB HID input board in development for push buttons, toggle switches, rotary switches and encoders. Planned with 128 native DirectInput inputs for custom cockpits and control panels.

Price to follow

4SB Hardware Connector with 20 USB ports

4SB-HUB20In development

POWERED USB · 20 PORTS

4SB Hardware Connector

Powered USB distributor in development for multiple cockpit devices. Planned with 20 USB ports and a shared data connection to the PC. Device functions depend on the relevant hardware and software.

Price to follow

4SB LED Output Board with 64 outputs for lighting and status indicators

4SB-LED64In development

64 INDIVIDUAL LED OUTPUTS

4SB LED Output Board 64

Output board for lighting, warning lamps and status indicators. Planned with 64 individually controlled LED outputs in two groups, 5 V power and data connectivity through Live Hub.

Price to follow

4SB OLED Display Controller showing general cockpit information

4SB-DISPLAYIn development

COCKPIT READOUT · OLED · USB

4SB OLED Display Controller

OLED readout in development for assigned cockpit and status data. Planned with a 72 MHz controller, USB connection and data connectivity through Live Hub. Compatible with Falcon BMS and DCS World.

Price to follow

Development concept of an OLED display board with four directly connected displays in different sizes

4SB-OLED4In development

UP TO 4 OLED DISPLAYS

4SB OLED Display Board 4

A controller board for up to four separate OLED displays, intended for custom cockpit readouts. Display types, interfaces and Live Hub integration will be defined during development.

Price to follow

4SB Potentiometer Input Board with 16 analogue inputs

4SB-POT16In development

16 ANALOG POTENTIOMETER INPUTS

4SB Potentiometer Input Board 16

Analogue input board in development for rotary controls, levers and potentiometers. Planned with 16 three-pin inputs in two groups of eight channels for custom cockpits and control panels.

Price to follow

4SB Force Sensor Stick Base with aluminium mount and two AD620 amplifier modules

4SB-FSSBIn development

FORCE-SENSING FLIGHT CONTROL

4SB Force Sensor Stick Base

Force-sensing stick base in development for flight simulation cockpits. The design includes separate roll and pitch measurement, an aluminium mount and two independent AD620 amplifier channels.

Price to follow

4SB Gauge Controller with four connections for X27.168 stepper motors

4SB-GAUGE4In development

4 × X27.168 STEPPER MOTORS

4SB Gauge Controller 4

Four-channel controller in development for physical pointer instruments using X27.168 stepper motors. Planned with four separate motor connections, USB and instrument data assigned through Live Hub.

Price to follow

4SB Gauge Controller with eight connections for X27.168 stepper motors

4SB-GAUGE8In development

8 × X27.168 STEPPER MOTORS

4SB Gauge Controller 8

Eight-channel controller in development for larger groups of physical pointer instruments. Planned with eight X27.168 motor connections in two groups and instrument data assigned through Live Hub.

Price to follow

The images show development concepts. Components, design and functionality may still change.

HARDWARE + SOFTWARE

One cockpit.
A shared data path.

4SB hardware provides building blocks for switches, controls, displays and instruments. Live Hub is intended to bring profiles, devices and data assignments together. The relevant simulator adapter supplies the data.

Input

Control

Input cards and the stick base capture switch states, analogue values and control forces.

LIVE HUB

Connect

Live Hub is the software centre. Integration is being developed separately for each hardware product.

Output

Display

LEDs, OLED displays and motor-driven instruments make cockpit data visible.

Hardware concept designed for use across simulators. Available features depend on the device, firmware and relevant simulator adapter.

Live Hub software

YOUR BUILD / YOUR IDEAS

What does your cockpit need?

Discuss features, connections and your intended use with us and the community on Discord.

Discuss your project on Discord

Your cockpit.
Your hardware.